Alltoilets (WA) High Level Audio Visual Interceptor Liquid Level Alarm – Built Tough for Australian Conditions

The Alltoilets (WA) High Level Audio Visual Interceptor Liquid Level Alarm has been designed for mine site applications to avoid environmental spill impacts, by providing warning indications when storage (Effluent, Grey Water etc.) tanks are approaching full.

The warning indications are determined by a float switch.

Warnings are:

  • Audio (buzzer)
  • Visual (flashing LED)
  • Water Shut Off Solenoid (Optional)

The Buzzer can be muted via button. The auxiliary output and flashing LED will continue to remain on, until the alarm condition is eradicated.

If the Buzzer is not muted, it will automatically silence after 5 minutes then go into ‘Chirp’ mode.

If the optional Water Shut-off Solenoid is installed, it will close when an ‘alarm event’ occurs, preventing over filling of a holding tank from the supply source (eg: toilet block mounted to an Alltoilets (WA) holding tank).

The Alltoilets (WA) High Level Audio Visual Interceptor Liquid Level Alarm has been built tough for hot Australian climate conditions.

Features
  • Designed to plug and play
  • Safety low voltage DC outlets
  • Normally Open Solenoid
  • Designed to initiate both high level visual and audible alarms as soon as an alarm condition occurs
  • Audible alarm can be silenced by way of the mute button or, it will automatically silence after 5 minutes of sounding
  • Tough UV Design for hot climate conditions
Specifications
    • Dimensions:
    • Length: 200mm
    • Width: 100mm
  • Weight: 3.5kg
    • Power Source
    • 10 amp 240 volt input
  • 24 volt DC output supply to (all devices)
    • Cable Length
    • Alarm 1.5 mtr
    • Solenoid 10 mtr
    • Float and weight 6 mtr
  • Installation: As per diagram supplied
Options
  • Available with solenoid function to cut water supply / flow